CEMB USA T7-P - Manuale (Pagina 2)

2
TECHNICAL FEATURES
Detecting system : Linear potentiometer
Working principle : Measuring of an angular position of the potentiometer
pin referred to the fix position of the pick-up
Measuring range : 0÷350° ±1°
Potenziometer characterist, : Resistance = 1000 Ohm
Linearity = ±0,05% ÷ ±0,5%
Sensitivity : 42,8mV/°/+15Vdc
Power supply : + 15 Vdc, GND
Mechanical connection : dia. 6,35 +0/-0,1: s.steel shaft
Electrical connection : Connector MIL C-5015, serial 3102/16, std.supplied
Case material : Aluminium
Environm. Operation condit. : Temperature = -50°C ÷ +100°C
Humidity = max 95% not condensing
Outside = IP55 EN60529/10.91
Vibrations = max.20g/2KHz
Wheith : ~ 0,85 Kg
Maintenance : Any
Enclosed drawings : 50699 = Ingombro, fissaggio, connessioni.
TRANSDUCER POSITIONING
Refer to enclosed drawing Nr. 50699.
- Avioid all bad handling of the connection shaft
- Calibrate the instrument
- Lock the detector
- Strictly join the pick-up connecting shaft with the control device
- Electrically connect the transducer to the Cemb “T” instrument by means of the
flying plug connector (supplied as standard accessory)