SMC Networks EZ CONNECT N SMCWIPCFN-G2 - Manuale (Pagina 75)

- 73 -
Event Configuration >> Motion Detect Trigger
Select the Enable option to enable the trigger function of the camera,
to send captured images within the motion detection area to an FTP
server, an email receiver, a NAS server, or a connected USB device.
It’s necessary to configure the corresponding settings, such as FTP
server and email server, to enable this feature.
- Schedule Profile: Select a schedule profile from the drop-
down list.
- Action: Select the destination that the captured images will be
sent to: Send Email, FTP Upload, Record to Network
Storage, or Save Image to USB.
Event Configuration >> Schedule Trigger
It’s possible to separately configure the schedule for the trigger
function of the camera by Email, FTP, or Network Storage. Select
the Enable option on each item, and then select a Schedule Profile
from the drop-down list and set the Interval time.
NOTE If the setting for the Network Storage Recording Time Per
Event option in General Settings is longer than the Interval
time in Network Storage schedule, then the recorded file will
be a continuous video clip.
For example, if the Network Storage Recording Time Per
Event is set to 10 seconds and the Interval to 5 seconds, the
recorded file will be a non-stop video clip as the camera will
record a 10-second video clip every 5 seconds.